Setting up a CT70 Clock

The setup of a CT70 is a two-step process.  First you must add the CT70 clock into PayClock Online. Secondly you would finish the setup at the clock itself. Important Note: Record the serial number from the time clock.  You will need this in order to add the clock to PayClock Online. The CT70 allows for you to use either a directly connected Ethernet cable or WI-FI to connect to PayClock Online.

Step 1 - Add the CT70 time clock to PayClock Online.

1. Select Clocks from the navigation list.
2. From the slide out menu select Manage Clocks.
3. Select the + New button.
4. Select CT70 and choose + Select.
5. Enter the serial number from the time clock in the Serial Number field.
6. Enter an identifier for the time clock in the Device Nickname field.
7. Select Save.

Step 2 - Set up the CT70 and connect to PayClock Online.

1. Connect the network cable if necessary and power supply to the CT70 time clock.
2. Plug in the power supply to an outlet and allow the time clock to boot up.
3. Tap the Settings button.
4. Tap in the PIN for the Admin and press ok. Please Note: By default the Admin PIN is 99999.
5. Tap Sync Now.
6. The time clock will connect to PayClock Online to download settings and employees.  

Wed 12/05/2018